Mechanical and flammability properties of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and nanocomposites: Effects of compatibilizer and graphene
DOI:
https://doi.org/10.11113/mjfas.v14n4.1233Keywords:
PLA/PBAT blend, nanocomposites, graphene nanoplatelets, flammability, mechanical propertiesAbstract
Poly(lactic acid) (PLA)/polybutylene adipate co-terephthalate (PBAT) blends were prepared by melt blending and compatibilized by glycidyl methacrylate (GMA). The effect of graphene nanoplatelets (GNP) on these compatibilized blends were investigated by incorporating GNP at different content. The formulated blend and nanocomposites were characterized for mechanical, morphological, thermal and flammability properties by using universal testing machine, impact tester, field emission scanning electron microscope (FESEM), x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), limiting oxygen index (LOI) and UL-94 respectively. The incorporation of 8 phr GMA into PLA/PBAT (75:25) blend as a compatibilizer results in a significant increase in impact strength (more than 14 times higher) compared to the uncompatibilized blend. Young's modulus and tensile strength of compatibilized PLA/PBAT nanocomposites increased upon addition of GNP and reached maximum values at 4 phr before decreasing slightly. However, impact strength decreased with increasing GNP contents. The thermal stability and the flame retardancy of the GNP reinforced blend nanocomposites were also improved with an increase in nanofiller content and the maximum values for the nanocomposites were achieved at 6 phr. Interestingly, the nanocomposites samples showed a UL-94 rating of V0 at 4 and 6 phr of GNP. Morphological studies using FESEM showed the GNP were evenly distributed and dispersed in the PLA/PBAT nanocomposites. The current methodology to prepare PLA/PBAT blend nanocomposite is an economical way to produce high strength biodegradable polymer which also has good flame retardancy.
References
J. Tengsuthiwat, U. Asawapirom, S. Siengchin and J. Karger-Kocsis, Mechanical, thermal, and water absorption properties of melamine–formaldehyde‐treated sisal fiber containing poly (lactic acid) composites, Journal of Applied Polymer Science 135 (2) (2018) 45681.
R. Nehra, S. N. Maiti and J. Jacob, Analytical interpretations of static and dynamic mechanical properties of thermoplastic elastomer toughened PLA blends, Journal of Applied Polymer Science 135 (1) (2018) 1-13.
H. Balakrishnan, I. Masoumi, A. A. Yussuf, M. Imran, A. Hassan and M.U. Wahit, Ethylene Copolymer Toughened Polylactic Acid Nanocomposites, Polymer-Plastics Technology and Engineering 51 (1) (2012) 19-27.
P. Liewchirakorn, D. Aht-Ong and W. Chinsirikul, Practical Approach in Developing Desirable Peel–Seal and Clear Lidding Films Based on Poly(Lactic Acid) and Poly(Butylene Adipate‐Co‐Terephthalate) Blends, Packaging Technology and Science 31 (5) (2018) 296-309.
O. Çoban, M. Ö. Bora, T. Kutluk and G. Özkoç, Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites, Polymer Composites 39 (S3) (2018) E1500-E1511.
K. Fukushima, M.-H. Wu, S. Bocchini, A. Rasyida and M.-C. Yang, PBAT based nanocomposites for medical and industrial applications, Materials Science and Engineering: C 32 (6) (2012): 1331-1351.
E. Quero, A. J. Müller, F. Signori, M. B. Coltelli and S. Bronco, Isothermal Cold‐Crystallization of PLA/PBAT Blends With and Without the Addition of Acetyl Tributyl Citrate, Macromolecular Chemistry and Physics 213, (1) (2012) 36-48.
L. Jiang, M. P. Wolcott and J. Zhang, Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends, Biomacromolecules 7 (1) (2006) 199-207.
W. Pivsa-Art, S. Pavasupree, O. Narongchai, U. Insuan, P. Jailak and S. Pivsa-Art, Preparation of Polymer Blends Between Poly (L-Lactic Acid), Poly (Butylene Succinate-Co-Adipate) and Poly (Butylene Adipate-Co-Terephthalate) for Blow Film Industrial Application, Energy Procedia 9 (2011) 581-588.
W. Pivsa-Art, A. Chaiyasat, S. Pivsa-Art, H. Yamane and H. Ohara, Preparation of Polymer Blends between Poly(Lactic Acid) and Poly(Butylene adipate-co-terephthalate) and Biodegradable Polymers as Compatibilizers, Energy Procedia 34 (2013) 549-554.
N. Zhang, Q. Wang, J. Ren and L. Wang, Preparation and properties of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with glycidyl methacrylate as reactive processing agent, Journal of Materials Science 44 (1) (2009) 250-256.
M. Kumar, S. Mohanty, S. Nayak and M. R. Parvaiz, Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocomposites, Bioresource Technology 101 (21) (2010) 8406-8415.
S. Adrar, A. Habi, A. Ajji and Y. Grohens, Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends, Applied Clay Science 157 (2018): 65-75.
S. Zhou, A. N. Hrymak and M. R. Kamal, Properties of microinjection-molded multi-walled carbon nanotubes-filled poly(lactic acid)/poly[(butylene succinate)-co-adipate] blend nanocomposites, Journal of Materials Science 53 (12) (2018) 9013-9025.
B. W. Chieng, N. A. Ibrahim, W. M. Z. Wan Yunus, M. Z. Hussein and V. Silverajah, Graphene Nanoplatelets as Novel Reinforcement Filler in Poly(lactic acid)/Epoxidized Palm Oil Green Nanocomposites: Mechanical Properties, International Journal of Molecular Sciences 13 (9) (2012) 10920-10934.
A. Teamsinsungvon, Y. Ruksakulpiwat and K. Jarukumjorn. Paper presented at 18th International Conference on Composite Materials (ICCM18), Korea, 21-26th August (2011).
S. Lin, W. Guo, C. Chen, J. Ma, and B. Wang, Mechanical properties and morphology of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized by transesterification, Materials & Design (1980-2015) 36 (2012) 604-608.
Y. Corre, J. Duchet, J. Reignier, A. Maazouz, Melt strengthening of poly (lactic acid) through reactive extrusion with epoxy-functionalized chains Rheologica Acta 50 (7) (2011) 613-629.
I. M. Inuwa, A. Hassan, S. A. Samsudin, M. Kassim, M. Haafiz and M. Jawaid, Mechanical and thermal properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites, Polymer Composites 35 (10) (2014) 2029-2035.
Y. Geng, S. J. Wang, and J.-K. Kim, Preparation of graphite nanoplatelets and graphene sheets, Journal of Colloid and Interface Science 336 (2) (2009) 592-598.
Z. Xu and C. Gao, In situ Polymerization Approach to Graphene-Reinforced Nylon-6 Composites, Macromolecules 43 (16) (2010) 6716-6723.
T. Kuila, S. Bose, C. E. Hong, M. E. Uddin, P. Khanra, N. H. Kim and J. H. Lee, Preparation of functionalized graphene/linear low density polyethylene composites by a solution mixing method, Carbon 49 (3)
(2011) 1033-1037.
J. M. Jin, J. M. Lee, M. H. Ha, K. Lee and S. Choe, Highly crosslinked poly(glycidyl methacrylate-co-divinyl benzene) particles by precipitation polymerization, Polymer 48 (11) (2007) 3107-3115.
M. J. Osman, N. A. Ibrahim, and W. M. Z. W. Yunus, Effect of Modified Clay on the Morphological and Thermal Properties of PLA/PBAT Nanocomposites, Oriental Journal of Chemistry 33 (6) (2017) 3015-3023.
